Accounts Fireworks Models Glm 4p6 vs DeepSeek v3.2
Accounts Fireworks Models Glm 4p6 (Fireworks AI, 202,800-token context) versus DeepSeek v3.2 (Amazon Bedrock, 163,840-token context). DeepSeek v3.2 is cheaper by 10% on a blended token mix. Accounts Fireworks Models Glm 4p6 uniquely supports structured output (json schema). Use the live calculator below to plug your real usage shape into both, then route the winner via Agent Command Center for shadow A/B without code changes.
Bottom line — Accounts Fireworks Models Glm 4p6 vs DeepSeek v3.2
Accounts Fireworks Models Glm 4p6 and DeepSeek v3.2 target overlapping workloads but differ sharply on economics. DeepSeek v3.2 runs roughly 10% cheaper on a blended input-plus-output token mix, The gap compounds at enterprise scale, making the cost axis the first filter most teams apply when deciding between these two models.
On capability surface area, the models diverge: Accounts Fireworks Models Glm 4p6 supports structured output (json schema) where the other does not. These differences are binary — either your workload needs the capability or it does not. Check whether any critical path in your agent pipeline depends on a capability only one model provides before committing to a migration.
For teams evaluating both models, the recommended path is a shadow A/B test: route production traffic through an OpenAI-compatible gateway, mirror a percentage to the candidate model, score both responses with an automated evaluator (faithfulness, tool-call correctness, latency), and compare cohort-level metrics over two weeks. Future AGI Agent Command Center supports this pattern with a single `base_url` change and built-in evaluators from the ai-evaluation SDK.
Live workload comparison
Same workload run through both models. The cheaper one is highlighted.
strategy: cost-optimized
primary:
model: accounts-fireworks-models-glm-4p6
provider: fireworks-ai
fallback:
model: deepseek-v3-2
provider: bedrock
shadow: { sample_rate: 0.05 } # mirror 5% of traffic to compare quality live| Accounts Fireworks Models Glm 4p6 | DeepSeek v3.2 | |
|---|---|---|
| Input price | $0.550/M | $0.620/M |
| Output price | $2.19/M | $1.85/M |
| Context window | 202,800 | 163,840 |
| Max output | 202,800 | 163,840 |
| Function calling | ✓ | ✓ |
| Vision | — | — |
| Audio input | — | — |
| Reasoning | ✓ | ✓ |
| Prompt caching | — | — |
| Structured output | ✓ | — |
| Pricing verified | Aug 6, 2026 | Aug 6, 2026 |
Benchmark comparison
Side-by-side public benchmark scores. Greener bar = winner.
Cost at scale: monthly spend at three usage volumes
Estimated monthly cost assuming 1,000 input + 200 output tokens per request — a realistic chat-agent shape. Adjust your own usage in the calculator at the top of this page for an exact number.
| Scale | Accounts Fireworks Models Glm 4p6 | DeepSeek v3.2 | Delta |
|---|---|---|---|
| Startup 10K requests/day | $296 /mo | $297 /mo | $0.600/mo |
| Mid-market 100K requests/day | $2,964 /mo | $2,970 /mo | $6.00/mo |
| Enterprise 1M requests/day | $29,640 /mo | $29,700 /mo | $60.00/mo |
At enterprise scale (1M requests/day), a difference of even ~10% in unit price compounds into thousands of dollars per month. Cached input pricing and batch tiers can shift this further — both are surfaced on each model's own page.
Capability diff — what you gain and lose on the swap
A specific list of what each model has that the other doesn't. If your workload depends on a row in Only Accounts Fireworks Models Glm 4p6, switching to DeepSeek v3.2 means re-architecting that path (and vice versa).
- • Structured output (JSON schema)
Capabilities both share (3)
- ✓ Function calling
- ✓ Streaming
- ✓ Native reasoning mode
Migration considerations
Concrete differences to wire through your stack before you flip traffic from one to the other.
- Max output tokens differ: 202,800 on Accounts Fireworks Models Glm 4p6 vs 163,840 on DeepSeek v3.2. Long-form generation tasks may truncate differently — adjust streaming UI and chunking accordingly.
- Accounts Fireworks Models Glm 4p6 has capabilities DeepSeek v3.2 lacks: Structured output (JSON schema). Switching to DeepSeek v3.2 means re-architecting any flow that depends on these.
- Provider changes from Fireworks AI to Amazon Bedrock. API authentication, rate-limit policy, regional availability, and billing all shift. Most teams route through an OpenAI-compatible gateway (e.g., Future AGI Agent Command Center) so the swap is a single `base_url` change instead of an SDK rewrite.
How to A/B test Accounts Fireworks Models Glm 4p6 vs DeepSeek v3.2 in production
If you're stuck between the two, run them side-by-side on real traffic. Four steps the Future AGI team uses internally:
- 1. Point your existing OpenAI SDK at
https://gateway.futureagi.com/v1. No code change beyondbase_urland a virtual key. - 2. Mark Accounts Fireworks Models Glm 4p6 primary, mirror 20% of traffic to DeepSeek v3.2 in shadow mode. Both responses are logged; only the primary is served to users.
- 3. Score every shadow response with an evaluator — faithfulness, tool-call correctness, response latency, cost. Built-in evaluators in ai-evaluation cover the common axes.
- 4. Compare cohort-level metrics after two weeks. Switch primary when the candidate wins on what matters to your workload — and stays within your latency budget.
Full walkthrough on the Agent Command Center page.
FAQ — Accounts Fireworks Models Glm 4p6 vs DeepSeek v3.2
Which is cheaper, Accounts Fireworks Models Glm 4p6 or DeepSeek v3.2? ▾
DeepSeek v3.2 is cheaper by roughly 10% on a blended input + output token mix. Input prices are $0.550/M for Accounts Fireworks Models Glm 4p6 versus $0.620/M for DeepSeek v3.2; output prices are $2.19/M versus $1.85/M. The exact savings depend on your input:output ratio — use the live calculator above to plug in your own request shape.
What is the context window of Accounts Fireworks Models Glm 4p6 versus DeepSeek v3.2? ▾
Accounts Fireworks Models Glm 4p6 supports up to 202,800 tokens of context. DeepSeek v3.2 supports up to 163,840 tokens. Accounts Fireworks Models Glm 4p6 has the larger window by a factor of 1.2x, which matters for long-document RAG, multi-turn agent sessions, and tasks that need to keep an entire codebase in working memory.
Do Accounts Fireworks Models Glm 4p6 and DeepSeek v3.2 both support tool calling? ▾
Yes — both Accounts Fireworks Models Glm 4p6 and DeepSeek v3.2 support native function calling. Both also support structured output via JSON schema, so an agent can be ported between them with the same tool definitions.
How do I A/B test Accounts Fireworks Models Glm 4p6 against DeepSeek v3.2 in production? ▾
Route both through an OpenAI-compatible gateway like Future AGI Agent Command Center with shadow mode enabled. Send 100% of traffic to your primary model, mirror 10–20% to the candidate, score every response with an evaluator (faithfulness, tool-call correctness, response time), and compare cohort-level metrics for two weeks. Switch when the candidate wins on the metrics that matter to your workload and stays within your latency budget.