DeepSeek V4.1 Flash 1017 vs Qwen-Plus (2025-04-28)
DeepSeek V4.1 Flash 1017 (Fireworks AI, 1,048,576-token context) versus Qwen-Plus (2025-04-28) (Alibaba DashScope, 129,024-token context). DeepSeek V4.1 Flash 1017 is cheaper by 6% on a blended token mix. DeepSeek V4.1 Flash 1017 uniquely supports vision input and structured output (json schema). Use the live calculator below to plug your real usage shape into both, then route the winner via Agent Command Center for shadow A/B without code changes.
Bottom line — DeepSeek V4.1 Flash 1017 vs Qwen-Plus (2025-04-28)
DeepSeek V4.1 Flash 1017 and Qwen-Plus (2025-04-28) are priced within 6% of each other, so cost alone is not the deciding factor. The comparison comes down to capabilities, context window, and benchmark performance on the specific task shape your workload demands.
DeepSeek V4.1 Flash 1017 ships a 1,048,576-token context window, 8.1x larger than Qwen-Plus (2025-04-28)'s 129,024 tokens. That headroom matters for long-document RAG pipelines, multi-turn agent sessions that accumulate tool-call history, and codebases where the entire repository needs to fit in a single prompt. If your average prompt stays under 129,024 tokens, the extra context on DeepSeek V4.1 Flash 1017 is insurance you may never use — and Qwen-Plus (2025-04-28) may win on other axes.
On capability surface area, the models diverge: DeepSeek V4.1 Flash 1017 supports vision input where the other does not; DeepSeek V4.1 Flash 1017 supports structured output (json schema) where the other does not; DeepSeek V4.1 Flash 1017 supports prompt caching where the other does not. These differences are binary — either your workload needs the capability or it does not. Check whether any critical path in your agent pipeline depends on a capability only one model provides before committing to a migration.
For teams evaluating both models, the recommended path is a shadow A/B test: route production traffic through an OpenAI-compatible gateway, mirror a percentage to the candidate model, score both responses with an automated evaluator (faithfulness, tool-call correctness, latency), and compare cohort-level metrics over two weeks. Future AGI Agent Command Center supports this pattern with a single `base_url` change and built-in evaluators from the ai-evaluation SDK.
Live workload comparison
Same workload run through both models. The cheaper one is highlighted.
strategy: cost-optimized
primary:
model: accounts-fireworks-models-deepseek-v4p1-flash-1017
provider: fireworks-ai
fallback:
model: qwen-plus-2025-04-28
provider: dashscope
shadow: { sample_rate: 0.05 } # mirror 5% of traffic to compare quality live| DeepSeek V4.1 Flash 1017 | Qwen-Plus (2025-04-28) | |
|---|---|---|
| Input price | $0.300/M | $0.400/M |
| Output price | $1.20/M | $1.20/M |
| Context window | 1,048,576 | 129,024 |
| Max output | 393,216 | 16,384 |
| Function calling | ✓ | ✓ |
| Vision | ✓ | — |
| Audio input | — | — |
| Reasoning | ✓ | ✓ |
| Prompt caching | ✓ | — |
| Structured output | ✓ | — |
| Pricing verified | Oct 22, 2026 | Oct 22, 2026 |
Benchmark comparison
Side-by-side public benchmark scores. Greener bar = winner.
Cost at scale: monthly spend at three usage volumes
Estimated monthly cost assuming 1,000 input + 200 output tokens per request — a realistic chat-agent shape. Adjust your own usage in the calculator at the top of this page for an exact number.
| Scale | DeepSeek V4.1 Flash 1017 | Qwen-Plus (2025-04-28) | Delta |
|---|---|---|---|
| Startup 10K requests/day | $162 /mo | $192 /mo | $30.00/mo |
| Mid-market 100K requests/day | $1,620 /mo | $1,920 /mo | $300/mo |
| Enterprise 1M requests/day | $16,200 /mo | $19,200 /mo | $3,000/mo |
At enterprise scale (1M requests/day), a difference of even ~10% in unit price compounds into thousands of dollars per month. Cached input pricing and batch tiers can shift this further — both are surfaced on each model's own page.
When to choose which
Picked from the data above — not vendor marketing. Match the rules to your workload, not the other way around.
Your workload needs long context — DeepSeek V4.1 Flash 1017 fits 1,048,576 tokens versus the other model's 129,024, enough headroom for full books, large codebases, or 100+ page documents in one shot.
Your inputs include screenshots, diagrams, or product photos — DeepSeek V4.1 Flash 1017 accepts image input natively, the other doesn't.
You re-send the same large system prompt across requests — DeepSeek V4.1 Flash 1017 supports prompt caching, cutting input cost on repeat hits.
Capability diff — what you gain and lose on the swap
A specific list of what each model has that the other doesn't. If your workload depends on a row in Only DeepSeek V4.1 Flash 1017, switching to Qwen-Plus (2025-04-28) means re-architecting that path (and vice versa).
- • Vision input
- • Structured output (JSON schema)
- • Prompt caching
Capabilities both share (3)
- ✓ Function calling
- ✓ Streaming
- ✓ Native reasoning mode
Migration considerations
Concrete differences to wire through your stack before you flip traffic from one to the other.
- Context window changes down 88% when moving from DeepSeek V4.1 Flash 1017 (1,048,576) to Qwen-Plus (2025-04-28) (129,024). Re-check any prompt that relies on cramming long history or documents.
- Max output tokens differ: 393,216 on DeepSeek V4.1 Flash 1017 vs 16,384 on Qwen-Plus (2025-04-28). Long-form generation tasks may truncate differently — adjust streaming UI and chunking accordingly.
- DeepSeek V4.1 Flash 1017 has capabilities Qwen-Plus (2025-04-28) lacks: Vision input, Structured output (JSON schema), Prompt caching. Switching to Qwen-Plus (2025-04-28) means re-architecting any flow that depends on these.
- Provider changes from Fireworks AI to Alibaba DashScope. API authentication, rate-limit policy, regional availability, and billing all shift. Most teams route through an OpenAI-compatible gateway (e.g., Future AGI Agent Command Center) so the swap is a single `base_url` change instead of an SDK rewrite.
How to A/B test DeepSeek V4.1 Flash 1017 vs Qwen-Plus (2025-04-28) in production
If you're stuck between the two, run them side-by-side on real traffic. Four steps the Future AGI team uses internally:
- 1. Point your existing OpenAI SDK at
https://gateway.futureagi.com/v1. No code change beyondbase_urland a virtual key. - 2. Mark DeepSeek V4.1 Flash 1017 primary, mirror 20% of traffic to Qwen-Plus (2025-04-28) in shadow mode. Both responses are logged; only the primary is served to users.
- 3. Score every shadow response with an evaluator — faithfulness, tool-call correctness, response latency, cost. Built-in evaluators in ai-evaluation cover the common axes.
- 4. Compare cohort-level metrics after two weeks. Switch primary when the candidate wins on what matters to your workload — and stays within your latency budget.
Full walkthrough on the Agent Command Center page.
FAQ — DeepSeek V4.1 Flash 1017 vs Qwen-Plus (2025-04-28)
Which is cheaper, DeepSeek V4.1 Flash 1017 or Qwen-Plus (2025-04-28)? ▾
DeepSeek V4.1 Flash 1017 is cheaper by roughly 6% on a blended input + output token mix. Input prices are $0.300/M for DeepSeek V4.1 Flash 1017 versus $0.400/M for Qwen-Plus (2025-04-28); output prices are $1.20/M versus $1.20/M. The exact savings depend on your input:output ratio — use the live calculator above to plug in your own request shape.
What is the context window of DeepSeek V4.1 Flash 1017 versus Qwen-Plus (2025-04-28)? ▾
DeepSeek V4.1 Flash 1017 supports up to 1,048,576 tokens of context. Qwen-Plus (2025-04-28) supports up to 129,024 tokens. DeepSeek V4.1 Flash 1017 has the larger window by a factor of 8.1x, which matters for long-document RAG, multi-turn agent sessions, and tasks that need to keep an entire codebase in working memory.
Do DeepSeek V4.1 Flash 1017 and Qwen-Plus (2025-04-28) both support tool calling? ▾
Yes — both DeepSeek V4.1 Flash 1017 and Qwen-Plus (2025-04-28) support native function calling. Both also support structured output via JSON schema, so an agent can be ported between them with the same tool definitions.
Can DeepSeek V4.1 Flash 1017 and Qwen-Plus (2025-04-28) process images? ▾
DeepSeek V4.1 Flash 1017 accepts native image input. Qwen-Plus (2025-04-28) does not — you would need to route image-heavy workloads through DeepSeek V4.1 Flash 1017 or add a separate vision model in front of Qwen-Plus (2025-04-28).
Which model supports prompt caching for cost reduction? ▾
DeepSeek V4.1 Flash 1017 supports prompt caching; the other does not. If your agent has a stable system prompt + retrieval context block that repeats across requests, DeepSeek V4.1 Flash 1017 gives you a 50–90% discount on those repeated input tokens at the provider level.
When should I choose DeepSeek V4.1 Flash 1017 over Qwen-Plus (2025-04-28)? ▾
Your workload needs long context — DeepSeek V4.1 Flash 1017 fits 1,048,576 tokens versus the other model's 129,024, enough headroom for full books, large codebases, or 100+ page documents in one shot. Your inputs include screenshots, diagrams, or product photos — DeepSeek V4.1 Flash 1017 accepts image input natively, the other doesn't. You re-send the same large system prompt across requests — DeepSeek V4.1 Flash 1017 supports prompt caching, cutting input cost on repeat hits.
When should I choose Qwen-Plus (2025-04-28) over DeepSeek V4.1 Flash 1017? ▾
On the data this page surfaces, Qwen-Plus (2025-04-28) is the right pick when DeepSeek V4.1 Flash 1017's lower price or different capability profile aren't a fit for your workload. Run the live calculator above against your actual usage shape to confirm.
How do I A/B test DeepSeek V4.1 Flash 1017 against Qwen-Plus (2025-04-28) in production? ▾
Route both through an OpenAI-compatible gateway like Future AGI Agent Command Center with shadow mode enabled. Send 100% of traffic to your primary model, mirror 10–20% to the candidate, score every response with an evaluator (faithfulness, tool-call correctness, response time), and compare cohort-level metrics for two weeks. Switch when the candidate wins on the metrics that matter to your workload and stays within your latency budget.